Skip to content
Toggle mobile menu
- On orders over $99 -
Deal of the Day
PADS & ROTORS
COBB TUNING STAGED PACKAGES
MOUNTUNE STAGED PACKAGES
FORD RACING STAGED PACKAGES
TRANSMISSION MOUNTS & BUSHINGS
SHIFT PLATES & SHIFT ARMS
SHORT THROW SHIFTER
METHANOL & WATER SYSTEMS
COLD AIR INTAKES
COOLANT HOSE KITS
THROTTLE BODY SPACERS
BOV & BPV
OIL FEED LINES & FITTINGS
TURBO UPGRADE KITS
CAMBER BOLTS & ARMS
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Steeda Oil Separator | Focus ST 2015-2018 | Focus RS 2015-2018
Usually Ships in 24 Hours
The Steeda Focus ST Oil Separator for 2015-2018 2.0L/2.3L Ecoboost MK3 Ford Focus ST/RS reduces detonation, oil burning and deposits on the valves by removing oil drawn through the PCV system before it can contaminate the intake charge. This is also very helpful with these turbo applications, where it is essential to keep oil from entering the turbo.
Excess crankcase pressure (sometimes known as "blow-by") is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This re-circulated air contains aerated oil from the crankcase which is burned by the engine.
Supercharged, nitrous-boosted and high mileage engines often draw excessive amounts of oil into the engine through the PCV system. The Steeda Focus ST Oil Separator for 2015,2016,2017,2018 Focus ST/RS plugs into the PCV hose between the PCV valve and the intake manifold and removes aerated oil from the re-circulated air and collects it in a tube that can be drained and recycled. It's designed to maintain the factory sensor too in the PCV system.
The Steeda Focus ST Oil Separator includes the oil separator and all required hardware. Designed for the Focus, this kit features a clear bowl and is designed for a 1/2" PCV system.
Tools Required: 1/4 Ratchet, 8 mm Socket, 14 mm Wrench, Screwdriver, Hose Cutter, 3/8 Ratchet, 3/8 Extension, 15 mm Socket, 10 mm Socket, T30 Torx Bit
Time of Install: About 1 Hour
Level of Difficulty: 3 - Removal of Cowl Recommended.
Reduces detonation, oil burning, and deposits on the valves.
Easy and quick installation.
Increased engine component life
Designed for a 1/2" PCV system
DeatschWerks 1700cc Injectors | Focus ST 2013-2018 | Focus RS 2016-2018
Steeda Throttle Body Spacer | Focus ST 2013-2018 | Focus RS 2016-2018
Radium Engineering Fuel Surge Tank Install Kit | Focus ST 2013-2018 | Focus RS 2016-2018
Radium Engineering PCV Catch Can Kit | Focus ST 2013-2018 | Focus RS 2016-2018
Steeda Rear Engine Mount | Focus ST 2013-2018 | Focus RS 2016-2018
Boomba Racing Intake Manifold Spacer | Focus ST 2013-2018 | Focus RS 2016-2018
K&N Performance Gold Oil Filter | Focus ST 2013-2018 | Focus RS 2016-2018
Radium Engineering Coolant Tank Kit | Focus ST 2013-2018 | Focus RS 2016-2018
Share your knowledge of this product.
Be the first to write a review »
Browse for more products in the same category as this item: