AP Cold Air Intake Kit with Cool Shield | Focus ST 2013-2018
Agency Power 2013-14 Ford Focus ST Cold Air Intake Kit with Cool Shield - AP-FST-110

Alternative Views:

Our Price: $450.00

Availability:: Usually Ships in 24 to 72 Hours
Product Code: AP-FST-110

Agency Power Colors

Wrinkle Black
Wrinkle Red [Add $40.00]
Yellow [Add $40.00]
White [Add $40.00]
Purple [Add $40.00]
Pink [Add $40.00]
Orange [Add $40.00]
Lime Green [Add $40.00]
Gunmetal [Add $40.00]
Blue [Add $40.00]

Agency Power 2013-14 Ford Focus ST Cold Air Intake Kit with Cool Shield - AP-FST-110

Like all cars, the best thing to start with is the intake and exhaust. So first on our product list for the Ford Focus ST was the intake system. Now the turbocharged Focus could always use some more air flow to increase power. The intake system is designed in a very direct manner from Ford. Airflow comes into the intake box from the front bumper small openings. It then travels past the sensor tube to behind the engine cover, and finally connects to a turbo inlet pipe directly to the turbocharger. Generally when designing a factory replacement intake kit, you want to retain the MAF or MAP sensor pipe diameter while improving airflow. For this we chose to keep the diameter of the intake pipe the same and continue its modularity with a separate turbo inlet pipe (sold separately), while reducing the restriction.

Utilizing a K&N cone air filter, we designed the air intake box to pull air from the factory inlet off the bumper but also via the open space that the engine has. With a heat shield and filter cover, the filter is able to provide the turbocharger with more air directly. Though some will argue the difference of “hot engine” air compared to a true cold air intake, test show using thermo couplers that the IAT’s are a minimal difference outside to inside of the plastic factory intake. Dyno testing, the intake had very consistent torque and horsepower gains through the peak of the RPM band of 3700 to 6000. Averaging about 10hp and 10ft/lbs of torque, the intake made almost 13 wheel horsepower at 5300 rpm.
The intake kit is available in wrinkled black powdercoat standard. Optional colors are available for the intake pipe only. The box will remain wrinkled black.

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
4 of 5 ok, but not for the impatient January 15, 2014
Reviewer: Logan Betteridge from Jacksonville, FL United States  
ok, so I purchased my intake, downpipe and exhaust ALL from Agency Power. I wanted to stay with the same manufacturer for all 3. After 2 months of waiting I finally received all 3. the INTAKE is awesome!! improved throttle response immediately. however, there were no instructions for anything!! I'm pretty mechanically inclined so I had no issues. But if you're not, there's a good chance you could run into some hair pulling lol.

Was this review helpful to you?

Browse for more products in the same category as this item: